Monitor MWH180 Hot Water Heater

   

Monitor Products has on-demand gas hot water heaters that can greatly benefit Alaskans due to their great efficiency. No energy is needed to keep hot water warm in a tank - you just make hot water as you need it. Better yet, you never run out! You get continuous hot water on-demand for as long as your fuel lasts.

The MWH180 tankless gas water heater is 82% or more efficient. On demand tankless gas water heaters provide a continuous supply of hot water at published flow rates with a preset temperature of 120°F; only heating water needed, cutting water heating costs up to 50%. The compact design of the MWH180 tankless water heater allows for indoor installation virtually anywhere. The MWH180 has a maximum water capacity of 5.8 gallons per minute at a 54°F temperature rise which allows you to use hot water at up to three plumbing fixtures simultaneously. A remote control is included. An additional remote control for enhanced performance is available.

Alaska Mining & Diving Supply stocks the MWH180 in the propane, internal installation version. Designed to be run off propane gas, this unit is installed inside your building and normally on an external wall for direct venting through the wall. It is possible to install on interior walls and also vent through the ceiling but this will require additional vent pipe and termination options. See the installation manual, particularly pages 47 and 52 regarding installation options. It is highly recommended you review the installation manual in detail before making your purchase. Alaska Mining & Diving Supply recommends having a certified plumber do your installation. Neither Alaska Mining & Diving Supply nor Monitor Products can be held responsible for improper installation or damages resulting from improper installation.

While the MHW180 can be converted from propane gas to natural gas use it is not recommended this procedure be undertaken by anyone other than a properly trained individual. The process is outlined in the installation manual. A unit preset for natural case can be special ordered from Alaska Mining & Diving Supply for the same price as a propane model. If interior room space is a problem exterior mount options are also available

Installation and Operating Manual

Full Color Brochure

See a Real Alaskan Installation!

bulletNew advanced technology, supplying hot water continuously at published flow rates with a preset temperature of 120° F
bulletIncludes main remote control, additional remote available for enhanced performance
bulletCrisp, modern design to blend in any decor
bulletBuilt in signal notifies the microprocessor to start the burner operation when the faucet is open and to stop when closed
bulletGas is only consumed when water is heating
bulletEnergy efficient electronic ignition system grants significant savings in energy and money
bulletAdvanced control system uses a sensor to maintain a constant outgoing water temperature
bulletFor added safety the microprocessor limits the maximum temperature of the hot water to 120° F when not using the remote control
bulletService codes are displayed on a remote control specifying diagnostics during maintenance calls
bulletDesigned to prevent varying temperature of hot water when the faucet is cycled on and off, quick response mode for rapid heating
bulletMounts easily to the wall requiring limited wall and no floor space
bulletEndless loop in input and output control ensures a stable flow of hot water
bulletRich, lean design of the burner produces minimum nitrous oxides
bulletPotted control circuit board provides greater reliability of electric components
 
Monitor Hot Water Heater
Monitor Remote Control
Technical Specifications MWH180
DimensionsHeight24 1/32 “
Width13 25/32″
Depth8 3/4 “
Weight43 lbs.
Maximum gas input rate180,000 BTU/h
Minimum gas input rate20,000 BTU/h
Hot water capacity range0.58 – 5.8 GPM
Maximum hot water capacity (54°F rise)5.8 GPM
Temperature range (with remote)96°F – 140°F
Maximum water supply pressure150 psi
Minimum water supply pressure15 psi
Noise level49 dB
ConnectionsGas3/4″ MNPT
Water inlet3/4″ MNPT
Hot water outlet3/4″ MNPT
Electric consumptionNormal61 W
Standby3.7 W
Anti-frost operation84 W
Included accessoryRemote controller

 

Monitor MWH180 with Free Freight* to the following Alaskan locations:

*Aniak, Anchor Point, Barrow, Bethel, Cantwell, Cordova, Delta Junction, Dillingham, Emmonak, Fairbanks, Galena, Glenallen, Healy, Homer, Iliamna, Juneau, Kenai, King Salmon, Kodiak, Kotzebue, McGrath, Nenana, Nome, Prudhoe Bay, Seward, St. Marys, Tok, Unalakleet, Valdez

$130.00 Shipping & Handling for UPS Ground Delivery to locations in the 48 contiguous states served by UPS

 If you do not live at a Free Freight destination, we will contact you with a freight quote prior to processing your order. Contact Us! for freight quotes to other locations or to purchase your Monitor MWH180 hot water heater.

 AMDS Monitor MWH180 Package Deal
Note - this unit preset for propane gas operation. Natural gas unit available by special order.

There are many installation options for the MWH180 hot water heater (see installation manual) that require different vent pipe options. Unlike the Monitor oil and gas heaters no vent pipe is included with the base unit. We have therefore put together the simplest option for installation on an exterior wall as listed below. It mimics the installation shown on page 33 of the installation manual. The MWH180 will need to be installed on an exterior wall, with a wall thickness of 3.9" to 9.8" for this kit to work. All wiring and plumbing fittings and lines needed to hook up to the unit will vary by location and need to be separately supplied.

1. Monitor MWH180 Water Heater List $1299.00
2. MO3816 Reducer/Vent Adapter List $47.62
3. MO3813 L-Termination Kit List $242.42
Total List Price $1589.04

AMDS MWH180 Package Price $1499.00
with Free Freight (see above)

 

Optional Items for your MWH180 Hot Water Heater

Tankless Hot Water Service Valve Kit
This kit is an ideal addition for anyone who might need to drain their tankless hot water heater on a regular basis. Normally this would mean disconnecting both the ingoing and outgoing water lines on the bottom of the unit, a process that can be messy if the hot water heater is located in an awkward position. The hot water unit should always be drained if there is any risk of power loss while the unit is unattended in freezing temperatures. This valve kit attaches directly to the bottom of the hot water heater and then the water lines are attached to it. Then, when it is time to drain the unit, simply attach a garden hose to the drain outlets - and open the valves! Nothing could be simpler. As a bonus you also get a pressure relief valve with drain that protects your lines from excessive pressure.
Part#MO40443PR
$139.95 
$10.00 SHIPPING if ordered on website - See details here

MPI logo & link
www.monitorproducts.com

Home ] Up ] Site Map ] Contact Us! ] Online Store ] [ Policies ] [ View Cart ]

ATVs   Boating   Diving   Mining   Metal Detecting   Miscellaneous   Snowmobiling

Prices are F.O.B. Anchorage, Alaska unless otherwise noted. All prices and specifications are subject to change without notice.
Copyright © 1998-2010 Alaska Mining & Diving Supply, Inc.  3222 Commercial Drive  Anchorage, AK 99501  907-277-1741  Fax 907-279-6398    webmaster

1976 - 2010  AMDS celebrates 34 years of service!