Hookah Air System w/20 ft Hose Air system kit consisting of KEHC1 Air Hose Connector, KERT1 Marlex Reserve Tank, KEAH20 20 foot Air Hose, KEH2 Harness, and KER1 Regulator. Maximum system pressure 60 P.S.I. Works well with T80 compressors. Weight approximately 17 pounds.  See Details

Hookah Air Regulator Low pressure hookah diving regulator. Designed for easier breathing at a lower working pressure for smaller, low pressure air compressors delivering air at up to 125 PSI. This regulator is not compatible with SCUBA gear. Mouthpiece may be removed so that the regulator may be fitted to a full face mask. The regulator will not attach directly to air lines and so requires the KEH2 harness to make the connection.   See Details

Hookah Harness Harness consisting of an adapter to mate the regulator to the air line and a quick release buckle. A harness is a must for safety, as it prevents pull on the regulator and keeps air line out of the divers way.  

Hookah Diving Air Hose 20FT Kink resistant 3/8" breathing air hose. It is a bright yellow for extra visibility. The hose floats, reducing the possibility of entanglements on the bottom. Complies with OSHA federal regulations for breathing standards. Coupled with 1/4" female ends. Maximum work pressure 250 PSI.  

Hookah Diving Air Hose 30FT Kink resistant 3/8" breathing air hose. It is a bright yellow for extra visibility. The hose floats, reducing the possibility of entanglements on the bottom. Complies with OSHA federal regulations for breathing standards. Coupled with 1/4" female ends. Maximum work pressure 250 PSI.  

Hookah Diving Air Hose 50FT Kink resistant 3/8" breathing air hose. It is a bright yellow for extra visibility. The hose floats, reducing the possibility of entanglements on the bottom. Complies with OSHA federal regulations for breathing standards. Coupled with 1/4" female ends. Maximum work pressure 250 PSI.  

Air Hose Connector Flexible hose connector for T80 air compressor. Connects air compressor to reserve tank. Includes one male 1/4" pipe fitting and one female 1/4" air fitting, 2.5 feet long. Not for use with KE263 compressor.  

High-Temp Air Hose Connector Flexible hose connector for all high pressure air compressors that output air at higher temperatures. Normally used with the KE263 air compressor to connect to the reserve tank. Includes one male 1/4" pipe fitting and one female 1/4" air fitting, 2.5 feet long 

Low Pressure Reserve Tank Three gallon corrosion-proof marlex polymer reserve tank. 1/4" male fitting on one end, 1/4" female fitting on the other end. Maximum pressure 60 PSI. Normally used with KET80 air compressor. Weight 5 lbs.  

Two Gallon Stainless Reserve Tank This two gallon stainless steel reserve tank is 1" long and 6" in diameter and weighs 8 lbs. It has a 1/4" female pipe opening at each end. Working pressure of up to 125 PSI.  See Details

Pressure Relief Valve This replacement pressure relief valve for the KET80 or K263 air compressor comes with four different springs for different pressure ranges. (yellow =25-50 psi, red = 51-100 psi, silver = 101-150 psi, blue = 151-200 psi) Each range is adjustable by turning the knob on top of the valve to change the spring pressure.  See Details

1/4" Air to Air Connector This brass fitting is used to connect multiple lengths of hookah hose together. For instance, the KEAH20 and KEAH30 hose could be connected together to form a single 50 foot length. The 1/4" male x male brass fitting has the correct thread and seat for the female connector used on the hookah hose. 

1/4" Air to Pipe Connector This brass fitting is used to connect hookah hose to 1/4" pipe fittings, such as tee or cross fittings. The brass 1/4" male air x 1/4" male pipe fitting has the correct thread and seat for the female connector used on the hookah hose on one end, and standard pipe thread on the other end. 

1/4" Pipe to Pipe Connector This brass fitting is used to connect 1/4" pipe fittings together, such as tee or cross fittings. The brass 1/4" male pipe x 1/4" male pipe fitting has standard pipe thread on each end. 

1/4" Female Pipe Connector This brass fitting is used to connect 1/4" male pipe fittings together. The brass 1/4" female pipe x 1/4" female pipe fitting has standard pipe thread in each end. 

1/4" Brass Pipe Elbow This brass 90 degree elbow fitting has a 1/4" male pipe fittings on one end and a 1/4" female pipe fitting in the other end 

Brass "T" Fitting Brass 1/4" female tee fitting. 

Brass "Cross" Fitting Brass 1/4" female cross fitting. 

1/4" Brass Pipe Plug This 1/4" square head brass pipe plug can be used to plug unused openings in tee or cross fittings. 

1/4" Quick Release Coupler Set 1/4 inch male and female thread included in this quick release coupling set. 

1/4" Hansen Locking Female 1/4 Inch quick release female Hansen fitting with safety lock. 

1/4" Hansen Locking Male 1/4 inch plug for Hansen male end connection. 

1/4" x 1/8" Brass Adapter This 1/4" x 1/8" brass adapter can allow a hookah hose to be connected to the first stage of many SCUBA regulator systems. Be sure to verify the outlet thread type and diameter as some first stage units are metric.  See Details