Evinrude 60 hp Commercial Outboard
Evinrude 60 hp Commercial Outboard Specifications | |
| Shaft Length | 20 in. |
| Dry Weight | 235 lbs. |
| Type | Inline 2-Cylinder E-TEC D.I. |
| Bore and Stroke | 3.601 in x 2.588 in |
| Displacement | 863 cc |
| Starting | Rope |
| Trim Method | Manual Tilt with Assist Cylinder |
| Rated Power | 65 hp @ 5,750 RPM |
| Full Throttle RPM Range | 5,500-6,000 RPM |
| Gear Ratio | 2.67:1 |
| Fuel Induction | E-TEC Direct Fuel Injection with stratified low RPM combustion Mode |
| Alternator | 81 Amps Total Output/25 Amps Net Dedicated |
| Cooling System | Pressure and Temperature Controlled Water Cooled |
| Steering | Remote or Accessory Tiller |
| Limited Factory Warranty | 3 Years Non-Declining |
| Emissions Compliance | CARB 3-STAR / EPA/European Union |
Financing is available on all Evinrude Outboard purchases. Contact Us! for more information on how to purchase your new Evinrude Outboard!
We wish to properly service and support the products we sell. For this reason, Alaska Mining & Diving Supply does not sell Evinrude Outboard outside of Alaska! If you are outside Alaska use the Evinrude Outboard Dealer Locator to find the dealer nearest you.
www.evinrude.com