The Lineage Carries On These new E-TEC engines use many of the very same components already proven reliable in E-TEC's other horsepower offerings. 60° V4 with of displacement that's significantly lighter than most competitive engines means faster acceleration and higher top speeds. Choose your instruments. No interference. Power to spare. Don't get swamped. Quiet pistons. Perfect power all the time. More torque, more fun.
Evinrude 130 hp Outboard
Evinrude 130 hp Outboard Specifications | |
| Shaft Length | 20/25 in. |
| Dry Weight | 390/405 lbs. |
| Type | V4 60o E-TEC D.I. |
| Bore and Stroke | 3.601 in x 2.588 in |
| Displacement | 1,727 cc |
| Starting | Electric |
| Trim Method | FasTrak Power Trim and Tilt |
| Rated Power | 130 hp @ 5,750 RPM |
| Full Throttle RPM Range | 5,500-6,000 RPM |
| Gear Ratio | 2.0:1/2.25:1 |
| Fuel Induction | E-TEC Direct Fuel Injection with stratified low RPM combustion Mode |
| Alternator | 133 Amps Total Output/50 Amps Net Dedicated |
| Cooling System | Pressure and Temperature Controlled Water Cooled |
| Steering | Remote or Accessory Tiller |
| Limited Factory | 3 Years Non-Declining |
| Emissions Compliance | CARB 3-STAR / EPA / European Union |
Financing is available on all Evinrude Outboard purchases. Contact Us! for more information on how to purchase your new Evinrude Outboard!
We wish to properly service and support the products we sell. For this reason, Alaska Mining & Diving Supply does not sell Evinrude Outboard outside of Alaska! If you are outside Alaska use the Evinrude Outboard Dealer Locator to find the dealer nearest you.
www.evinrude.com